|
|
Photoelectric Beam Sensor,
PB-30SE, PB-50SE |
 |
|
Detection System |
: |
Near infrared (through type) |
|
Alarm Output |
: |
Dry contact relay output :
1c, Reset time: Detection time + delay time
(approx. 1sec) 30V(AC/DC) 0.5A Max |
|
Supply Voltage |
: |
10V to 30V DC (non-polarity) |
|
Power Consumption |
: |
60mA to 75mA |
|
Ambient Temperature |
: |
-25° C to +60° C |
|
Mounting Position |
: |
outdoor |
|
Optional |
: |
Pole, Pole attachment, sensitivity level
checker |
|
External Dimensions |
: |
W89mm x H175mm x D77.5mm |
|
Weight |
: |
600g |
|
|
|
Photoelectric Beam Sensor, PB-30SU(Flush
mount type) |
 |
|
Detection System |
: |
Near infrared (through type) |
|
Alarm Output |
: |
Dry contact relay output :
N/C or N/O,
Reset time: Detection time + delay time
(approx. 2sec)
24V(AC/DC) 0.25A Max |
|
Supply Voltage |
: |
10V to 30V DC (non-polarity) |
|
Power Consumption |
: |
32mA |
|
Ambient Temperature |
: |
-15° C to +55° C |
|
Mounting Position |
: |
Wall, Pillar (indoor) |
|
External Dimensions |
: |
W70mm x H120mm x D45mm |
|
Weight |
: |
90g |
|
|
|
Photoelectric Beam Sensor,
PB-IN-50HF, PB--IN-100HF, PB-IN-200HF(4 beams type) |
 |
|
Detection System |
: |
Near infrared (through type) |
|
Alarm Output |
: |
Dry contact relay output :
1c, Reset time: Detection time + delay time
(approx. 1sec) 30V(AC/DC) 0.5A Max |
|
Supply Voltage |
: |
10V to 30V DC (non-polarity) |
|
Power Consumption |
: |
60mA to 85mA |
|
Features |
: |
1. Beam power selection
2. Auto-gain lock
3. Frost proof cover |
|
Ambient Temperature |
: |
-25° C to +60° C |
|
Mounting Position |
: |
Outdoor, Indoor |
|
Optional |
: |
Pole, Pole attachment, pole-side cover,
heater, flash mount housing |
|
External Dimensions |
: |
W104mm x H390mm x D98mm |
|
Weight |
: |
Transmitter 1200g, Receiver
1300g |
|
|
|
 |
